• Pallet-Stop

    The Pallet Stop prevents wall and product damage.

    • 18" long x 5" tall, centered between rack frame, protects two skids at the same time.
    • Anchors to the floor with two legs on either side of the frame.
    • Mounting feet may be mounted against the wall.

  • Rack Deflect

    Rack Deflect prevents potential damage to crossbars by creating a barrier between the crossbars and forklifts.

    • 4" tall x 1/4" thick steel bars.
    • Steel bars can be stacked to create 1/2" thickness for additional strength.
    • Available in 42" and 48".
    • Mounted flush using double-end studs and weld nuts so that nothing “catches" on the hardware.
    • Easy installation.
    • Multiple bars can be used as bracing for the rack, providing reinforcement to the rack.

  • Pallet-Guide

    Prevents potential damage to crossbars and rack corners from pallets by creating a guide for pallets.

    • 4" tall x 1/4" thick steel bars.
    • Available in 42" and 48".
    • Mounted flush using double-end studs and weld nuts so that nothing “catches" on the hardware.
    • Multiple bars can be used as bracing for the rack, providing additional reinforcement to the rack.
    • Hardware included.

  • Pallet-Guide--Stop

    Two products in one! - Keeps flue space clear and prevents damage to walls behind rack.

    • 4" tall x 1/4" thick steel bar with 10" return..
    • Available in 42", 45" (42" with 3" overhang), 48", and 51" (48" with 3" overhang).
    • Mounts flush to double end stud and weld nuts so that nothing "catches" on the hardware.
    • Easy installation - hardware included.
    • Creates additional reinforcement for the rack.
    • Available without rear stop - see Pallet Guide.
    • Hardware included.

  • Back of Rack

    Back of Rack is designed to stop employees from pushing a skid off the back of the rack.

    • High tensile steel brackets are 7 gage and are bolted to frames.
    • Strong horizontal braces are secured in place with a 1/2" thick pin.
    • Cut installation costs in half because there is no need for heavy netting, or the extreme hassle of netting installations.
    • Low maintenance compared to broken straps, broken mesh panels and torn netting.
    • Bracket measures 6" off of the frame.
    • The 10 gage thick brace is 4" tall, 97-1/2" in length and is formed into a "C" channel for strength .
    • 1/2" bracket hardware included.
    • Use multiple braces for loose carton areas.
    • Stocking in 8' sections, covering two pallet positions.
    • Can be used in back-to-back rack design to protect flue space product from damage.