Request Information
  • Stand Guard Guardrail

    Stand Guard Guardrail

    (20)

    "Stand Guard" ribbed barrier guardrails. All welded LIFT-OUT design standard, which reduces installation cost by half.

    • Rails are constructed of 10 gauge high-tensile steel.
    • 4" posts have a 10" x 10" x 1/2" base plate with a 10,000 lb at 5 mph impact rating.
    • Installs in half the time.  No hardware needed!!
    • Sleeves are welded directly to the posts.  No costly brackets as an afterthought.  
    • Posts are available in heights of 18", 26" & 42"
    • Rails are available in 2' through 10'. (one foot increments)
    • Rails measure center to center of post.
    • 5/8" x 4.75" anchors available upon request.

  • Stand Guard Guardrail

    Stand Guard Heavy Duty Guardrail

    (15)

    "Stand Guard" ribbed barrier guardrails. All welded LIFT-OUT design standard, which reduces installation cost by half.

    • Rails are constructed of 10 gauge high-tensile steel.
    • 5" posts have a 10" x 10" x 5/8" base plate with a 12,000 lb at 5 mph impact rating.
    • Installs in half the time.  No hardware needed!!
    • Sleeves are welded directly to the posts.  No costly brackets as an afterthought.  
    • Posts are available in heights of 18" & 42"
    • Rails are available in 2' through 10'. (one foot increments)
    • Rails measure center to center of post.  5" posts add 1 inch to every section of rail.
    • 5/8" x 4.75" anchors available upon request.

  • Stand Guard Lite Rails

    Stand Guard Lite Rails

    (15)

    "Stand Guard LITE" ribbed barrier guardrails. All welded LIFT-OUT design standard, which reduces installation cost by half.

    • Rails are constructed of 14 gauge high-tensile steel.
    • Impact rating of 5,000 lbs at 5 mph.
    • Installs in half the time.  No hardware needed!!
    • Sleeves are welded to posts, no costly brackets as an afterthought.
    • Rail fits 4" posts with 8" x 8" base plate.
    • Available in heights of 18" & 42".
    • Rails are 2' through 10'. (one foot increments)
    • Rails measure center to center of post.
    • 5/8" x 4.75" anchors available upon request.

    ** This product is designed for light-duty applications such as impacts from electric pallet trucks, powered stackers, high-lift scissor trucks, manual pallet trucks, and push carts.

  • Wall Mounted Bumper Rail

    Wall Mounted Bumper Rail

    (4)

    Wall Mounted Bumper Rails are designed to mount to any wall surface to prevent damage when storing product. 

    • Rails are constructed of 14 gauge high-tensile steel.
    • Rails are available in 4 different lengths.
    • Mounting holes on 16" centers.
    • Mounting hardware not included.
    • Powder coated safety yellow finish.