Contact Us
Call: 1.877.728.3891
fax: 1.630.876.1993
Email: Sales@Save-Ty.com
"Stand Guard" ribbed barrier guardrails. All welded LIFT-OUT design standard, which reduces installation cost by half.
  • Rails are constructed of 10 gauge high-tensile steel.
  • 4" posts have a 10" x 10" x 1/2" base plate with a 10,000 lb at 5 mph impact rating.
  • Installs in half the time.  No hardware needed!!
  • Sleeves are welded directly to the posts.  No costly brackets as an afterthought.  
  • Posts are available in heights of 18", 26" & 42"
  • Rails are available in 2' through 10'. (one foot increments)
  • Rails measure center to center of post.
  • 5/8" x 4.75" anchors available upon request.
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Base Plate

Stock Item

4RPC-18 N/A 4" x 18" Corner Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPC-26 N/A 4" x 26" Corner Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPC-42-DBL N/A 4" x 42" Dbl Corner Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPE-18 N/A 4" x 18" End Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPE-26 N/A 4" x 26" End Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPE-42-DBL N/A 4" x 42" Dbl End Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPE-42-DBL-Offset N/A 4" x 42" Dbl End Post Offset N/A 10 x 10 x 1/2 inches N/A Yes
4RPIN-18 N/A 4" x 18" Inline Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPIN-26 N/A 4" x 26" Inline Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPIN-42-DBL N/A 4" x 42" Dbl Inline Post N/A 10 x 10 x 1/2 inches N/A Yes
4RPT-42-DBL N/A 4" x 42" Dbl Tee Post N/A 10 x 10 x 1/2 inches N/A Yes
RRIB-10 N/A 10' Guardrail N/A N/A Yes
RRIB-2 N/A 2' Guardrail N/A N/A Yes
RRIB-3 N/A 3' Guardrail N/A N/A Yes
RRIB-4 N/A 4' Guardrail N/A N/A Yes
RRIB-5 N/A 5' Guardrail N/A N/A Yes
RRIB-6 N/A 6' Guardrail N/A N/A Yes
RRIB-7 N/A 7' Guardrail N/A N/A Yes
RRIB-8 N/A 8' Guardrail N/A N/A Yes
RRIB-9 N/A 9' Guardrail N/A N/A Yes
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1